Research on EPS Control Strategy of Heavy Vehicle Based on Simulink

Wireless Personal Communications - As one of the hot spots and advanced technology for the development of automotive electronic control technologies, electric power steering system has broad...     

埋地管道泄漏内封堵装置设计与研究

针对流体输送埋地管道泄漏问题,设计了一种利用管道机器人携带封堵气囊进行快速应急封堵修复的埋地管道泄漏内封堵装置。采用矩阵变换方法建立了牵引系统驱动轮过弯方程,利用MATLAB软件对过弯方程进行了验证,同时利用ADAMS软件仿真分析过弯路径与驱动轮转角对牵引系统行走速度的影响。研究结果表明:由两个串联封堵器组成的应急封堵系统可满足复杂工况下的管道泄漏封堵要求;牵引系统驱动轮在弯管内部行走时,单轮速度呈周期性变化,但三个驱动轮整体周期运动特性一致;驱动轮转角在25°~40°时,牵引系统行走速度与驱动轮转角成正比,且转角为30°时驱动效果最好。该内封堵装置的结构设计可为管道泄漏应急封堵领域装备的研发提供重要参考。     

核设备抗震鉴定试验中功率谱密度检验方法分析评估

为满足核设备抗震鉴定试验中输入运动的功率谱密度（PSD）要求，基于对规范背景和目标PSD算法的调研以及典型算例的对比分析，对PSD的检验方法进行分析评估。结果表明，检验PSD最为直观的方法即对比输入运动PSD与目标PSD；根据各类目标PSD算法的结果精度、保守性及其规范依据，推荐使用2014版美国核管理委员会标准审查大纲（SRP）3.7.1节附录B中人工合成时程的方式来计算目标PSD:虽然该算法通常适用于核电厂的厂址设计反应谱，但对于设备抗震鉴定反应谱，仅需将人工合成时程的目标反应谱替换为鉴定反应谱即可；采用本文推荐方法计算目标PSD时，设备抗震鉴定输入运动的PSD检验应与SRP 3.7.1保持一致，即在0.3 Hz到目标反应谱的最高截断频率范围内包络目标PSD的70%。      

Mineral fertilizers with recycled manure boost crop yield and P balance in a long-term field trial

Nutrient Cycling in Agroecosystems - Crop uptake and neglecting to apply phosphate (P) fertilizer are important reasons for P deficit in the agro-ecosystem. Recycled manure from within the system...     

2.25Cr-1Mo与2.25Cr-1Mo-0.25V钢冷却转变对比分析

采用相变仪、光学显微镜及扫描电镜研究了2.25Cr-1Mo和2.25Cr-1Mo-0.25V钢冷却转变过程,并分析了钒对其冷却转变的影响。结果表明,与2.25Cr-1Mo钢的CCT曲线相比,2.25Cr-1Mo-0.25V钢铁素体转变区及贝氏体转变区均向右移,并且在现有试验条件下已无法观察到珠光体转变区;钒添加到2.25Cr-1Mo钢中,能够提高钢的淬透性,2.25Cr-1Mo-0.25V钢在48 000 ℃/h冷速下能生成部分马氏体;钒能够细化钢板显微组织,与2.25Cr-1Mo钢相比,2.25Cr-1Mo-0.25V钢在800 ℃/h冷速下组织更为细小。     

Improved stability in P3HT:PCBM photovoltaics by incorporation of well‐designed polythiophene/graphene compositions

Morphological and photovoltaic stabilities of poly(3‐hexylthiophene) (P3HT):phenyl‐C₆₁‐butyric acid methyl ester (PC₇₁BM) solar cells were investigated in pristine and modified states. To this end, four types of patterned/assembled nanostructures, namely reduced graphene oxide (rGO)‐g‐poly(3‐dodecylthiophene)/P3HT patched‐like pattern, rGO–polythiophene/P3HT/PC₇₁BM nanofiber, rGO‐g‐P3HT/P3HT cake‐like pattern and supra(polyaniline (PANI)‐g‐rGO/P3HT), were designed on the basis of rGO and various conjugated polymers. Intermediately covered rGO nanosheets by P3HT crystals (supra(PANI‐g‐rGO/P3HT)) performed better than sparsely (patched‐like pattern) and fully (cake‐like pattern) covered ones in P3HT:PC₇₁BM solar cell systems. Supra(PANI‐g‐rGO/P3HT) nanohybrids largely phase‐separated in active layers (root mean square = 0.88 nm) and also led to the highest performance (power conversion efficiency of 5.74%). The photovoltaic characteristics demonstrated decreasing trends during air aging for all devices, but with distinct slopes. The steepest decreasing plots were obtained for the unmodified P3HT:PC₇₁BM devices (from 1.77% to 0.28%). The two supramolecules with the most ordered structures, that is, cake‐like pattern (10.12 mA cm^?2, 51%, 0.58 V, 2.2 × 10^?6 cm² V^?1 s^?1, 4.3 × 10^?5 cm² V^?1 s^?1, 0.69 nm and 2.99%) and supra(PANI‐g‐rGO/P3HT) (12.51 mA cm^?2, 57%, 0.63 V, 1.2 × 10^?5 cm² V^?1 s^?1, 3.4 × 10^?4 cm² V^?1 s^?1, 0.82 nm and 4.49%), strongly retained morphological and photovoltaic stabilities in P3HT:PC₇₁BM devices after 1 month of air aging. According to the morphological, optical, photovoltaic and electrochemical results, the supra(PANI‐g‐rGO/P3HT) nanohybrid was the best candidate for stabilizing P3HT:PC₇₁BM solar cells. © 2020 Society of Chemical Industry     

Effect of intermetallics on susceptibility of Mg alloy welds to liquation cracking

ABSTRACT

The circular-patch welding test was used to study the liquation and liquation cracking of AZ-series Mg alloys. A heat treatment was carried out on the as-received AZ91 alloy to dissolve the γ(Mg₁₇Al₁₂) particles before welding. The circular-patch welding test was then conducted on the heat-treated, as-received AZ91 alloy using AZ61 and AZ91 filler wires. The results showed that the susceptibility of AZ91 alloy to liquation and liquation cracking was significantly reduced by the dissolution of massive γ(Mg₁₇Al₁₂) particles via a heat treatment before welding as the liquation mechanism was changed. Both constitutional liquation and incipient melting occurred in the partially melted zone of the as-received AZ91 welds, while only incipient melting occurred in the heat-treated AZ91 welds.     

Shotgun metagenomics of dust microbiome from flight deck and cabin in civil aviation aircraft

Microbial exposure is related to the health of passengers on commercial aircraft, but no studies characterized the microbial composition at the species level and identified their ecological determinants. We collected vacuum dust from floor and seat surfaces in flight decks and cabins of 18 aircraft, and amplification-free shotgun metagenomics was conducted to characterize the microbial composition. In total, 7437 microbial taxa were identified. The relative abundance for bacteria, eukaryote, viruses, and archaea was 96.9%, 1.8%, 0.3%, and 0.03%, respectively. The top bacterial species mainly derived from outdoor air and human skin included Sphingomonas, Corynebacterium, Micrococcus luteus, Variovorax paradoxus, Paracoccus dentrificans, and Propionibacterium acnes. The abundance of NIAID-defined pathogens was low, accounted for only 0.23% of total microbes. The microbial species and functional composition were structured by the indoor surface type (R² = 0.38, Adonis), followed by the manufacturer of the aircraft (R² = 0.12) and flight duration (R² = 0.07). Indoor surfaces affected species derived from different habitats; the abundance of dry skin and desiccated species was higher on textile surfaces, whereas the abundance of moist and oily skin species was higher on leather surfaces. The growth rates for most microbes were stopped and almost stopped.     

On the integration of SIC and MIMO DoF for interference cancellation in wireless networks

Recent advances in MIMO degree-of-freedom (DoF) models allowed MIMO research to penetrate the networking community. Independent from MIMO, successive interference cancellation (SIC) is a powerful physical layer technique used in multi-user detection. Based on the understanding of the strengths and weaknesses of MIMO DoF and SIC, we propose to have DoF-based interference cancellation (IC) and SIC help each other so that (i) precious DoF resources can be conserved through the use of SIC and (ii) the stringent SINR threshold criteria can be met through the use of DoF-based IC. In this paper, we develop the necessary mathematical models to realize the two ideas in a multi-hop wireless network. Together with scheduling and routing constraints, we develop a cross-layer optimization framework with joint DoF IC and SIC. By applying the framework on a throughput maximization problem, we find that SIC and DoF IC can indeed work in harmony and achieve the two ideas that we propose.     

基于深度学习的小样本中药材粉末显微图像识别

针对中药材种类繁多、数据量稀少以及难以对其导管进行分类的问题,提出一种基于多通道颜色空间与注意力机制模型的卷积神经网络改进方法。首先,采用多通道颜色空间将RGB颜色空间与其他颜色空间合并为6通道作为网络输入,使网络学习亮度、色调和饱和度等特征信息,弥补数据量的不足;其次,在网络中加入注意力机制模型,其中通道注意力模型将两个池化层紧密连接到一起,空间注意力模型将多尺度空洞卷积结合到一起,使网络将注意力聚焦于小样本中关键的特征信息。实验结果表明,针对34种中药材样本的8774张导管图像,采用多通道颜色空间和注意力机制模型的方法,与原始ResNet网络相比,准确率分别提升了1.8个百分点和3.1个百分点,将二者结合后准确率提升了4.1个百分点,说明所提方法对小样本分类的准确率有着大幅度的提升。